Crushes fluorescent lamps of any size while removing mercury vapors. Reduces labor, recycling costs, and storage vs. packing lamps.
Fill up containers with bulbs, ballasts, batteries, or e-waste at your own pace and mail back via prepaid shipping.
For larger amounts of bulbs, ballasts, batteries, or e-waste. Trucks come pick up waste at your location for recycling.
The stringency table below provides examples of state regulations compared to the EPA regulations. We strongly recommend that you discuss stringency with your primary state regulatory contact. This information should not be interpreted as definitive legal guidance. This document was produced in June 2004, and we do not guarantee its accuracy after that date, as state policies may change at any time.
("same" means the state policy is the same as the federal policy)
Jurisdiction: Federal EPA
Generator Exemption (CESQG): Generators producing less than 100 kg (220 pounds) of hazardous waste (HW) or 1 kg acute HW in each month, including all HW generated. CESQGs are exempt from federal rules, but not exempt from liability (40 CFR 261.5)
Where can waste from CESQG go? Waste may go to any Municipal Solid Waste Landfill (MSWLF)
Can the waste be declared non-hazardous, based on TCLP? Wastes that test less than 0.2mg/l soluble mercury are not considered hazardous under federal rules.
Other stringency or exemptions? Crushing can only be done by generator (40 CFR 262.34); crushed waste that is not UW- must be managed as RCRA HW. Crushing not allowed within federal UWR, but may be within State UW regulations. No one may crush third-party lamps without treatment authorization [1]. No mobile treatment units.
Jurisdiction: Ohio
Generator Exemption (CESQG): All business lamps are regulated, regardless of size of business or how many lamps
Where can waste from CESQG go? Waste must go to RCRA Sub-C facility or state equivalent
Can the waste be declared non-hazardous, based on TCLP? same
Other stringency or exemptions? same
PRIMARY CONTACT
Jeffrey Mayhugh - Supervisor
Agency Address: Ohio EPA, Hazardous Waste Compliance and Inspection Support, Division of Materials and Waste Management, 50 West Town Street P.O. Box 1049 Columbus, Ohio, 43216-1049
Phone: (614) 644-2950
Email: Jeffrey.Mayhugh@epa.ohio.gov
SECONDARY CONTACTS
Timothy Killeen
Phone: (614) 728-8961
Email: Timothy.Killeen@epa.ohio.gov
Ohio EPA, Hazardous Waste Compliance and Inspection Support, Division of Materials and Waste Management Main Number
Phone: (614) 466-2621
EPA Main Number
Phone: (614) 644-3020 or 1-800-426-6515